P0333Knock Sensor 2 Circuit High (Bank 2)
What it means
The knock sensor 2 signal or circuit voltage is too high, usually an open circuit, a short to voltage, or real mechanical noise from the engine.
Symptoms
- Check engine light
- Reduced power (ignition retarded as a precaution)
- Higher fuel consumption
Common causes
- Open or shorted sensor wiring (often under the intake manifold)
- Corroded connector
- Failed knock sensor
- Shield or ground fault
What to check first
- Measure the sensor resistance and insulation to ground
- Scope the signal while tapping the block near the sensor
- Inspect the harness, especially under the intake manifold
Generic OBD-II meaning. Manufacturer-specific meanings and checks can differ; always check the service information for the car.