Share a caseSign in
FuelSeverity Medium: diagnose soon

P0201Cylinder 1 Injector "A" Circuit/Open

What it means

The ECU sees an electrical fault in the injector circuit of cylinder 1, usually an open circuit. The injector may not open at all, so that cylinder misfires.

Symptoms

  • Misfire on cylinder 1
  • Rough idle and loss of power
  • Check engine light, sometimes flashing

Common causes

  • Open injector winding (cylinder 1)
  • Broken wire or corroded injector connector
  • Open injector supply (fuse or relay)
  • ECU injector driver fault

What to check first

  1. Measure the injector resistance and compare it with the others
  2. Check the supply voltage at the injector connector with the key on
  3. Scope the injector control: look for the switching and the inductive spike
Can I drive with P0201? Usually yes for a short distance, but performance or economy may suffer and the fault can get worse. Diagnose it soon.

Generic OBD-II meaning. Manufacturer-specific meanings and checks can differ; always check the service information for the car.

How to test the parts behind P0201

Petrol fuel injector (port injection)Wiring, typical values, multimeter and scope testsCommon-rail diesel injectorWiring, typical values, multimeter and scope tests

Known engine problems that set P0201

1.9 TDI PD: Injector wiring loom under the cam coverVolkswagen, Audi, Skoda, Seat, Ford · typically 150,000–300,000 km

Cases with P0201 (0)

Share yours

No published cases with this code yet.

Colleagues asking about P0201

Ask for help

Stuck on P0201? Describe what you measured and ask the community.

P0201: questions and answers

What does P0201 mean?

P0201: Cylinder 1 Injector "A" Circuit/Open. The ECU sees an electrical fault in the injector circuit of cylinder 1, usually an open circuit. The injector may not open at all, so that cylinder misfires.

What are the symptoms of P0201?

Misfire on cylinder 1. Rough idle and loss of power. Check engine light, sometimes flashing.

What causes P0201?

Open injector winding (cylinder 1). Broken wire or corroded injector connector. Open injector supply (fuse or relay). ECU injector driver fault.

How do you diagnose P0201?

1. Measure the injector resistance and compare it with the others 2. Check the supply voltage at the injector connector with the key on 3. Scope the injector control: look for the switching and the inductive spike

Can I drive with P0201?

Usually yes for a short distance, but performance or economy may suffer and the fault can get worse. Diagnose it soon.