Share a caseSign in
EmissionsSeverity Low: usually safe to drive

P0030HO2S Heater Control Circuit (Bank 1 Sensor 1)

What it means

The ECU sees a fault in the circuit it uses to switch the oxygen sensor heater, usually an open heater element or wire. Without the heater the sensor takes longer to work after a cold start.

Symptoms

  • Check engine light
  • Slightly higher fuel use after cold starts
  • Usually no change in how the car drives

Common causes

  • Open heater element inside the oxygen sensor
  • Blown heater fuse or missing 12 V supply
  • Damaged wiring near the exhaust
  • ECU heater driver fault

What to check first

  1. Measure the heater resistance at the sensor (typically 3–15 Ω, check the specification)
  2. Check the 12 V supply with the key on
  3. Check the control (ground) side from the ECU with a test lamp or scope
Can I drive with P0030? Usually yes. P0030 rarely affects how the car drives, but it keeps the check engine light on and can fail an emissions test.

Generic OBD-II meaning. Manufacturer-specific meanings and checks can differ; always check the service information for the car.

Cases with P0030 (0)

Share yours

No published cases with this code yet.

Colleagues asking about P0030

Ask for help

Stuck on P0030? Describe what you measured and ask the community.

P0030: questions and answers

What does P0030 mean?

P0030: HO2S Heater Control Circuit (Bank 1 Sensor 1). The ECU sees a fault in the circuit it uses to switch the oxygen sensor heater, usually an open heater element or wire. Without the heater the sensor takes longer to work after a cold start.

What are the symptoms of P0030?

Check engine light. Slightly higher fuel use after cold starts. Usually no change in how the car drives.

What causes P0030?

Open heater element inside the oxygen sensor. Blown heater fuse or missing 12 V supply. Damaged wiring near the exhaust. ECU heater driver fault.

How do you diagnose P0030?

1. Measure the heater resistance at the sensor (typically 3–15 Ω, check the specification) 2. Check the 12 V supply with the key on 3. Check the control (ground) side from the ECU with a test lamp or scope

Can I drive with P0030?

Usually yes. P0030 rarely affects how the car drives, but it keeps the check engine light on and can fail an emissions test.