Share a caseSign in
EmissionsSeverity Medium: diagnose soon

P0136O2 Sensor Circuit (bank 1 sensor 2)

What it means

The ECU sees an electrical fault in the oxygen sensor circuit, bank 1 sensor 2. The downstream sensor (after the catalyst) is mainly used to check how well the catalyst works.

Symptoms

  • Check engine light
  • Usually no change in how the car drives
  • Catalyst monitor may not complete

Common causes

  • Open or shorted signal or reference wire
  • Corroded connector (often from exhaust heat or water)
  • Failed oxygen sensor
  • Exhaust leak near the sensor

What to check first

  1. Graph the sensor voltage at 2,500 rpm: a narrowband sensor should switch between about 0.1 and 0.9 V
  2. Check the wiring where it runs near the exhaust
  3. Check for exhaust leaks upstream of the sensor
Can I drive with P0136? Usually yes for a short distance, but performance or economy may suffer and the fault can get worse. Diagnose it soon.

Generic OBD-II meaning. Manufacturer-specific meanings and checks can differ; always check the service information for the car.

How to test the parts behind P0136

Oxygen (lambda) sensorWiring, typical values, multimeter and scope tests

Cases with P0136 (0)

Share yours

No published cases with this code yet.

Colleagues asking about P0136

Ask for help

Stuck on P0136? Describe what you measured and ask the community.

P0136: questions and answers

What does P0136 mean?

P0136: O2 Sensor Circuit (bank 1 sensor 2). The ECU sees an electrical fault in the oxygen sensor circuit, bank 1 sensor 2. The downstream sensor (after the catalyst) is mainly used to check how well the catalyst works.

What are the symptoms of P0136?

Check engine light. Usually no change in how the car drives. Catalyst monitor may not complete.

What causes P0136?

Open or shorted signal or reference wire. Corroded connector (often from exhaust heat or water). Failed oxygen sensor. Exhaust leak near the sensor.

How do you diagnose P0136?

1. Graph the sensor voltage at 2,500 rpm: a narrowband sensor should switch between about 0.1 and 0.9 V 2. Check the wiring where it runs near the exhaust 3. Check for exhaust leaks upstream of the sensor

Can I drive with P0136?

Usually yes for a short distance, but performance or economy may suffer and the fault can get worse. Diagnose it soon.