Share a caseSign in
EmissionsSeverity Low: usually safe to drive

P0052HO2S Heater Control Circuit High (Bank 2 Sensor 1)

What it means

The voltage on the heater control circuit is too high: usually the heater element or its wire is open, so the ECU never sees current flow. Without the heater the sensor takes longer to work after a cold start.

Symptoms

  • Check engine light
  • Slightly higher fuel use after cold starts
  • Usually no change in how the car drives

Common causes

  • Open heater element inside the oxygen sensor
  • Blown heater fuse or missing 12 V supply
  • Damaged wiring near the exhaust
  • ECU heater driver fault

What to check first

  1. Measure the heater resistance at the sensor (typically 3–15 Ω, check the specification)
  2. Check the 12 V supply with the key on
  3. Check the control (ground) side from the ECU with a test lamp or scope
Can I drive with P0052? Usually yes. P0052 rarely affects how the car drives, but it keeps the check engine light on and can fail an emissions test.

Generic OBD-II meaning. Manufacturer-specific meanings and checks can differ; always check the service information for the car.

Cases with P0052 (0)

Share yours

No published cases with this code yet.

Colleagues asking about P0052

Ask for help

Stuck on P0052? Describe what you measured and ask the community.

P0052: questions and answers

What does P0052 mean?

P0052: HO2S Heater Control Circuit High (Bank 2 Sensor 1). The voltage on the heater control circuit is too high: usually the heater element or its wire is open, so the ECU never sees current flow. Without the heater the sensor takes longer to work after a cold start.

What are the symptoms of P0052?

Check engine light. Slightly higher fuel use after cold starts. Usually no change in how the car drives.

What causes P0052?

Open heater element inside the oxygen sensor. Blown heater fuse or missing 12 V supply. Damaged wiring near the exhaust. ECU heater driver fault.

How do you diagnose P0052?

1. Measure the heater resistance at the sensor (typically 3–15 Ω, check the specification) 2. Check the 12 V supply with the key on 3. Check the control (ground) side from the ECU with a test lamp or scope

Can I drive with P0052?

Usually yes. P0052 rarely affects how the car drives, but it keeps the check engine light on and can fail an emissions test.