Share a caseSign in
Air intakeSeverity High: diagnose before driving on

P0221Throttle/Pedal Position Sensor/Switch "B" Circuit Range/Performance

What it means

The throttle or pedal position sensor signal is electrically possible, but it doesn't make sense compared with other sensors or with what the engine is doing. The throttle or pedal position sensor measures how far the throttle (or the accelerator pedal) is open.

Symptoms

  • Limp mode with very limited power
  • Hesitation, surging or erratic idle
  • Electronic throttle warning light

Common causes

  • Worn track in the sensor (dead spot)
  • Dirty or sticking throttle body
  • Throttle not learned after cleaning or replacement
  • Poor connection

What to check first

  1. Graph the two throttle position signals while opening slowly: they should be smooth and mirror each other
  2. Clean the throttle body and run the relearn procedure
  3. Check the connector pins and the 5 V reference
Can I drive with P0221? Not recommended. P0221 can lead to stalling, limp mode or engine damage; diagnose it before driving further.

Generic OBD-II meaning. Manufacturer-specific meanings and checks can differ; always check the service information for the car.

Cases with P0221 (0)

Share yours

No published cases with this code yet.

Colleagues asking about P0221

Ask for help

Stuck on P0221? Describe what you measured and ask the community.

P0221: questions and answers

What does P0221 mean?

P0221: Throttle/Pedal Position Sensor/Switch "B" Circuit Range/Performance. The throttle or pedal position sensor signal is electrically possible, but it doesn't make sense compared with other sensors or with what the engine is doing. The throttle or pedal position sensor measures how far the throttle (or the accelerator pedal) is open.

What are the symptoms of P0221?

Limp mode with very limited power. Hesitation, surging or erratic idle. Electronic throttle warning light.

What causes P0221?

Worn track in the sensor (dead spot). Dirty or sticking throttle body. Throttle not learned after cleaning or replacement. Poor connection.

How do you diagnose P0221?

1. Graph the two throttle position signals while opening slowly: they should be smooth and mirror each other 2. Clean the throttle body and run the relearn procedure 3. Check the connector pins and the 5 V reference

Can I drive with P0221?

Not recommended. P0221 can lead to stalling, limp mode or engine damage; diagnose it before driving further.